Skip to main content

Rover Demo

Planned

This page describes the planned second product demo: a differential-drive rover. The app is intended to live at apps/rover_demo. Design details are in the openember repo at docs/design/rover-demo.md. Build and run steps will be added here once code and launch files land.

rover_demo is a sim-capable, DIY-hardware mobile-robot story: on top of Turtle Demo’s Link / messages / launch path, it adds actuation and safety, odometry, optional lidar, and shares system/ and services/ (Hardware Interface, web_console, and so on).

Budget target: ≤ ¥3000 BOM per vehicle (including either a 2D lidar or a depth camera), so the demo is not starved of sensors.

Where it sits among demos​

DemoRole
Turtle DemoPlanar kinematics; learn multi-node messaging
Rover DemoDiff-drive base + sensing + e-stop / loss-of-command; same topic contract in sim and on hardware
Agri Station Demo (planned)Smart-agri edge station: soft-real-time sensing, alerts/degrade, ops surface

One OpenEmber tree builds different product packages via Kconfig and per-product *.launch.yaml. Do not fork system / services per product.

Naming​

Use rover_demo, not a generic robot_demo, so the wheeled base stays distinct from bipeds, arms, and other morphologies.

Planned capabilities​

CapabilityNotes
Diff-drive command/rover/cmd_vel (Twist2D or equivalent)
Pose / odometry/rover/odom or /rover/pose
SafetyE-stop wins; local stop on command timeout
Ranging (recommended)/rover/scan, etc.; Mock without hardware
Launchconfigs/rover.launch.yaml + launch_manager
Ops (optional)Compose with existing health / web_console / host_monitor

v1 does not ship a full SLAM / nav stack; lidar is for demos and simple obstacle reaction.

Hardware BOM (order-of-magnitude)​

CategoryDirectionApprox. ¥
SBC + storagePi / Radxa / Orange Pi class200–500
Diff-drive chassis kitMotors + driver included preferred150–400
IMU / encodersOdom and attitude30–250
2D lidar or depth cameraRPLIDAR A1 class or similar400–1200
Power and structureBattery, wiring, mounts / prints150–450
Total≤ 3000

Default recommendation: chassis + encoders + IMU + 2D lidar + SBC. Phasing and non-goals live in the main-repo design doc.

Simulation​

  • Default: host-side software unicycle / diff-drive integration (light deps, CI-friendly).
  • Optional: Gazebo (or similar) with a clearly licensed diff-drive URDF (Apache/BSD, etc.); do not vendor non-commercial commercial appearance meshes.

Relation to Turtle​

Turtle is the minimal messaging loop; Rover is the product-shaped mobile base on the same middleware. Newcomers should run Turtle Demo first.

See Architecture overview and OpenEmber Link.